|
1. Cut jewelry wire to desired length with metal
cutters. (A safe bet is twice around the wrist).
2. Put one end of the wire through the toggle clasp loop
and secure with a crimp bead and pliers.
3. Open an 8mm silver-plated jump ring and put on 5 mini
silver-plated bells. Close jump ring. Make three of these.
4. String one 3mm silver-plated fluted bead onto the
wire. Continue stringing with a 6mm silver-plated fluted bead, an 8mm crystal
bead, another 6mm silver-plated bead, and a 3mm silver-plated fluted bead.
5. String your jump ring of bells.
6. Continue the arrangement of beads, alternating
between charms and bells until you achieve your desired length.
7. Leave yourself about 1-2 inches at the end.
8. String a crimp bead onto the wire and loop the end of
the wire through the other part of the toggle clasp.
9. Crimp the bead as closely as possible, so that the
bracelet does not become loose.
10. Thread the remaining wire back through the beads,
until it disappears.
|
